MTS Safety Products, Inc. :: Traffic Safety Products
| Traffic Safety Products |
|
See details
|
18" Lightweight STOP/STOP Paddle
- Lightweight! - Weighs Only 11 Ounces!
- 18" x 18" Size
- Lightweight Plastic Corrugated Material
- Finishes: Enamel (Non-Reflective), Engineer Grade & High-Intensity Reflective
- 1" PVC Plastic Handle
- Sold Per Each
O-SSCE18
Our price: $8.17
|
|
See details
|
18" STOP/GO Paddle
- STOP/GO for use by Flaggers, Crossing Guards
- .040" Aluminum or .125 Fiberglass (FRP)
- Standard paddle has a 1" x 9"steel handle with a vinyl bike grip
- Paddle finishes are Baked Enamel or Engineer Grade Reflective
O-SGAE18 Aluminum/Baked en...
Our price: $25.63
|
|
See details
|
18" STOP/SLOW Paddle with Telescopic Staff
- 18" x 18" Size
- .040" Aluminum or .125 Fiberglass (FRP)
- Fiberglass Staff Extends From 60" to 94"
- Baked Enamel, Engineer Grade, High Intensity or Prismatic Finishes Available
- Meets Federal MUTCD Requirements
O-SLAR1894 Aluminum/Engi...
Our price: $72.53
|
|
See details
|
18" STOP/SLOW Traffic Paddle
- STOP on one side, SLOW on reverse side
- 18" x 18" size
- .040" Aluminum or .125 Fiberglass (FRP)
- Standard paddle has a 1" x 9"steel handle with a vinyl bike grip
- May be used with staff (O-60PVC) or (O-06ST)
- Finishes: Baked Enamel, Engineer Grade, High ...
Our price: $24.43
|
|
See details
|
18" STOP/STOP Paddle
- STOP on both sides
- Used primarily by Crossing Guards
- 18" x 18" size
- .040" Aluminum or .125 Fiberglass (FRP)
- Standard paddle has a 1" x 9"steel handle with a vinyl bike grip
- Paddle finishes are Baked Enamel or Engineer Grade Reflective
- Me...
Our price: $21.27
|
|
See details
|
24" STOP/SLOW Paddle with Fiberglass Staff
- STOP on one side, SLOW on reverse side
- 24" x 24" size
- .063" Aluminum or .125 Fiberglass (FRP)
- Fiberglass staff extends from 60" to 94"
- Finishes: Baked Enamel, Engineer Grade, High Intensity or Prismatic
- Meets Federal MUTCD requirements for Work ...
Our price: $96.87
|
|
See details
|
24" STOP/SLOW Traffic Paddle
- STOP on one side, SLOW on reverse side
- 24" x 24" size
- .063" Aluminum or .125 Fiberglass (FRP)
- Standard paddle has a 1" x 9"steel handle with a vinyl bike grip
- Recommended to use with staff (O-60PVC) or (O-06ST) due to weight
- Finishes: Baked Ename...
Our price: $39.47
|
|
See details
|
24" STOP/STOP Paddle
- STOP On Both Sides
- Used Primarily By Crossing Guards
- 24" x 24" Size
- .040" Aluminum
- Standard Paddle Has 1" x 9" Steel Handle With Vinyl Bike Grip
- Meets Federal MUTCD Requirements For School Zones
O-SSAE24 24" Aluminum/Baked En...
Our price: $31.8
|
|
See details
|
3-Flag Adaptor Set for Sign Ribs
- Clamps to fiberglass vertical rib on rollup sign
- Allows for display of up to 3 flags above sign
- Permits use of wooden staff flags up to ¾" diameter
- Set includes front and back plates as well as screws
- Sold per each set
O-2...
Our price: $20.83
|
|
See details
|
36" 10# Lime Traffic Cone with Collars
- Wide body design
- Flow molded, dayglow fluorescent lime with white inner liner
- Reflective 6" and 4" cone collars
- Sold per each
O-3004290
Drop-shipped from factory. Must purchase a minimum of 14 to meet factory requ...
Our price: $64.93
|
|
See details
|
5/16" Break-Away Nut for Signs
- Fits standard mount bolts for signs
- All aluminum
- When twisted with wrench, hex section breaks away, preventing tampering
- Sold in bags of 100
O-BWN516
Our price: $133.33
|
|
See details
|
5/16" x 3/8" "Prison-Pruf" Set Screw
- Fits most street sign brackets
- Zinc-plated
- Allen-type screw with center pin
- Tamper-resistant
- Requires T100 special tool
- Sold in bags of 100
O-PRP38 "Prison-Pruf" Screws
O-T100 Special Tool
Our price: $66.67
|
|
See details
|
A-Frame Plastic Barricade Leg
Injection molded, structural foam A-Frame legs are the most durable units available on the market. Mounting holes accomodate virtually all boards on the market today. Superior to blow-molded units.
O-AF28
Our price: $27.5
|
|
See details
|
Back-To-Back Sign Bracket for Round Posts
- Interlocking set hangs 2 signs on round posts
- Fits stardard punched signs as well as odd punched hole locations
- Set: 2 ea. large brackets 3.75" long w/5" mounting bar, 2 ea. small brackets 3.617" long, 2 cross bars, 2 ea. 5/16" x 5/8" bolt/nut sets & 2 ea. 5/16" x ...
Our price: $15.07
|
|
See details
|
Cone Holder For 18" & 28" Cones
Our heavy duty coneholder is made of zinc plated steel to withstand years of rugged use. It bolts securely to work vehicles and holds 18" and 28" traffic cones.
O-TCH-28
Our price: $31
|
|
See details
|
Custom Printed Survey Flags/4' x 5" with 36" Wire Staff
Printed Marking Flags are ideal for aboveground marking in a variety of industries. From utility construction to line locating, hardware to forestry, landscaping and lawn care to pet containment - these flags ensure consistent communication and long-lasting visibility for your project.
Our price: $216.03
|
|
See details
|
Deluxe Cross Separator
Cross Separator is for use with all deluxe post caps and flat or extruded blades. Ii thas a 5-1/2" slot length like the post caps. Includes 4 5/16" standard set screws. Order F for Flat or X for Extruded.
O-BA8A For Flat Signs
O-BA7A For Extruded Si...
Our price: $10.33
|
|
|
|
